Atop Technology MB5001C User Manual - Manual (Page 18)

User Manual Version 1.0
MB5001C series 1-port Modbus Gateway
Copyright © 2010 Atop Technologies, Inc.
All rights reserved. Designed in Taiwan.
17
the password.
Note: One can press the default key of product to reset password to the default value.
3.3.3 Network Setup
Click on the “Networking” link and the following screen appears. Fill in IP information under TCP/IP field.
Alternatively, one can do the configuration by clicking on DHCP to obtain auto IP address, gateway and
subnet mask information.
Enable SNMP by checking “Enable”, fill in network identification information under SNMP field and click on
the “Save Configuration” button to save the changes, please notice that the setting will not become effective
until one restart MB5001C.( Figure 3.20)
Figure 3.19 TCP/IP setup