Atop Technology MB5001C User Manual - Manual (Page 35)

User Manual Version 1.0
MB5001C series 1-port Modbus Gateway
Copyright © 2010 Atop Technologies, Inc.
All rights reserved. Designed in Taiwan.
34
Locate
The user can apply this function to locate a device when its IP address is known, but its position is unknown.
If a device is selected, the device will appear to sing. Users can locate the device by selecting the
Configuration submenu Locate or clicking the Locate button on the toolbar.
Reboot
The device should be restarted after a successful modification of parameter configuration. Users can also
carry out a restart through the submenu option Reset.
The user can also select several devices at one time, and save the parameter information of these selected
devices into a designated parameter file by selecting "Save all the selected devices".
Configure by Browser
Some devices are supplied with build-in Web servers, which will be used to configure similar to DeviceView
software. Users can carry out any parameter setting directly through the submenu option
“Config by
Browser ”, and a Web browser is shown in the figure below.