A.3.3, Configuration – Atop Technology MB5001C User Manual User Manual
Page 33
Advertising
User Manual Version 1.0
MB5001C series 1-port Modbus Gateway
Copyright © 2010 Atop Technologies, Inc.
All rights reserved. Designed in Taiwan.
32
A.3.3. Configuration
This function is for device configuration to set up parameters, to import and to export the parameters, and to
set up some options. Here is the list of configurations:
“Network”, “SNMP”, “COM Port”, “Locate”, “Reset”,
“Import Setting”, “Export Setting”, “Virtual COM”, “Config by browser” and “Options.” Users can carry out a
configuration operating through menu or by clicking the corresponded button on the toolbar, shown as the
figure below:
Advertising