Barranca Diamond MK-5009G/5013G - Manual (Page 10)

10
MK-5000G PRODUCT SPECIFICATION
Masonry Types
The MK-5000G can cut a variety of masonry types including, cinder block, slump stone block, wall brick, paver brick, con-
crete block and cylinders, roofing tile, marble, granite, decorative rock or almost any other non-ferrous material.
Spring Assisted Cutting Head
The MK-5000G is designed with a spring-assisted cutting head to allow for easier step cutting. The Cutting Head can be
locked in the down position when cutting smaller pieces.
Shaft Operated Water Pump
The MK-5000G has a flexible shaft, belt driven water pump supplying cooling water to the blade for wet cutting operations.
PRODUCT SPECIFICATIONS
The MK-5000G is a versatile gas powered Block Saw. Operated and used according to this manual, the MK-5000G will
provide years of dependable service.
Engine Specifications
Engine specifications for the different models of the MK-5000G are listed in the tables below.
Model MK-5009G MK-5013G
Engine Gas Gas
Horsepower GX270 Cyclone GX390 Cyclone
Shaft RPM (20" Blade) 1851 1851
LxWxH (inches) 60" x 26" x 72" 60" x 26" x 72"
LxWxH (mm) 1524 x 660 x 1826 1524 x 660 x 1826
Weight 498 lbs. (225kg) 513 lbs. (233kg)
Part # 158935 158936
General Specifications
Blade Capacity*
20"
Arbor Size 1"
Depth of Cut (20" blade) 8"
Table Travel 38-1/2"
* The MK-5000 series gas saws will accept a 24” blade when fitted with the optional 24” blade guard.
Accessories Included with MK-5000 Series Saws
Centrifugal Water Pump
Cutting Guide
Drain Plug
The MK-5000G is not designed to cut plastic or ferrous (metals) material. NOTE: