Mk-5000g setup – Barranca Diamond MK-5009G/5013G User Manual

Page 14

Advertising
background image

14

Fill Throat

Upper Limit

Filling Fuel Tank

1. Gasoline is highly flammable and explosive. You can be burned or seriously injured when

handling fuel.

2. To fuel, stop engine if running, and allow it to cool.

3. Refuel in a well-ventilated area.

4. Keep gasoline away from appliance pilot lights, barbecues, electric appliances, power tools, etc.

5. Wipe up spills immediately.

1. Fuel can damage paint and plastic. Be careful not to spill fuel when filling the fuel tank.

Damage caused by spilled fuel IS NOT covered under the warranty.

2. DO NOT use stale or contaminated gasoline, or an oil/gasoline mixture.

3. Using a ladder meeting OSHA specification is recommended.

4. Use unleaded gasoline with a pump octane rating of 86 or higher.

WARNING

NOTE:

MK-5000G SETUP

(A)

To fill Fuel Tank refer to refueling

section of Engine Manual

(B)

Verify fuel level is below the

throat of the Fuel Tank

Pre-start Inspection

The pre-start inspection should be performed before beginning any job.

CAUTION If the Diamond Blade shows signs of fatigue cracking, replace the blade before starting work.

(A)

Inspect Blade for damage –

Verify Blade is correct for

material being cut

(B)

Inspect Wooden Strip for

excessive grooves

(C)

Verify Movable Cutting Table

moves freely

Advertising