Barranca Diamond MK-5009G/5013G - Manual (Page 25)

25
Two Year Maintenance
(A)
Check Fuel Line
(Shop Maintenance Required)
Use standard grease when lubricating the MK-5000. Clean the Zerk fitting when finished lubricating. Apply grease slowly;
stop when grease is seen between joints.
Lubrication Points
(A)
Rear Blade Guard Stay-level
pivot point lubrication point, if
equipped
(B)
Front Blade Guard Stay-level
pivot point lubrication point, if
equipped
(C)
Front and Rear Connecting
Arms, left side (from front) lubri-
cation points, if equipped
(D)
Front and Rear Connecting
Arms, right side lubrication
points, if equipped
(E)
Elevation Pivot Bracket, Pivot
Shaft Housing lubrication point
(F)
Cutting Head Rear Connecting
Arm lubrication point, if equipped
MK-5000G MAINTENANCE