Det-Tronics X3302 Multispectrum IR Flame Detector with HART - Manual (Page 7)

5 2.3 95-8613
X 3302 rooT menu
When HART communication is established, the first menu displayed is the X 3302 Root menu:
1) Fire (Yes/no) Indicates “Y” if the device is in a fire alarm status — analog output is at 20 mA,
fire alarm relay is actuated and LED is red.
2) Fault (Yes/no) Indicates “Y” if a fault condition exists. Go to “Device Info” and select “Status
Info” to determine the nature of the fault.
3) device Info menu Provides access to manufacturer and HART information, current device status,
factory settings, and history logs.
4) Command menu This menu allows the operator to initiate a manual oi test and also to perform
various reset/clear functions.
5) device setup menu This menu allows various setup, configuration and calibration functions.
devICe InFo menu
This menu allows access to a variety of “read only” information.
1) general Info menu Factory information.
2) hArT Info menu HART Specific Variables.
3) status Info menu Current operating status and/or diagnostic information.
4) detector settings Factory settings relating to relay operation, detector sensitivity and response.
5) history menu Display log files: Alarm, Fault, General.
Device Info Menu
1) General Info Menu
2) HART Info Menu
3) Status Info Menu
4) Detector Settings
5) History Menu
X3302 Root Menu
1) Fire (Yes/No)
2) Fault (Yes/No)
3) Device Info Menu
4) Command Menu
5) Device Setup Menu
X3302 Root Menu
1) Fire (Yes/No)
2) Fault (Yes/No)
3) Device Info Menu
4) Command Menu
5) Device Setup Menu