Det-Tronics X2200 UV Flame Detector - Manual (Page 26)

24 95-8549 13.1
appenDiX b
CsA AppROVAL
pRODuCTs
CLAss 4818 04 -
SIGNAL APPLIANCES - Systems - For Hazardous Locations
Class I, Division 1, Groups B, C, and D (T5); Class II, Division 1, Groups E, F, and G (T5);
Class I, Division 2, Groups A, B, C, and D (T3); Class II, Division 2, Groups F and G (T3);
Class III; Enclosure NEMA/Type 4X;
Ultraviolet Flame Detector/Controller X2200 series, rated 18-30 Vdc, 2.5 Watts to 7.6 Watts.
Relay contacts rated 5 Amps @ 30 Vdc.
AppLICAbLE REQuIREMENTs
CSA Std C22.2 No. 25-1966 – Enclosures for use in Class II Groups E,F & G Hazardous Locations
CSA-C22.2 No. 30-M1986 – Explosion-Proof Enclosures for Use in Class I Hazardous Locations
CAN/CSA-C22.2 No. 94-M91 – Special Purpose Enclosures
CSA-C22.2 No. 142-M1987 – Process Control Equipment
CSA-C22.2 No. 213-M1987 – Nonincendive Electrical Equipment for Use in Class I, Division 2 Hazardous Locations
The following accessories are CSA approved for use with the X2200 Flame Detector:
part Number Description
102740-002 Magnet
007739-001 Magnet and Extension Pole
007290-001 Q9033B Stainless Steel Mounting Arm Assembly is for aluminum and stainless steel detectors
007290-002 Q9033A Aluminum Mounting Arm Assembly is for aluminum detectors only
011385-001 Q9033 Collar Attachment