Det-Tronics X3300EXE Protect-IR Multispectrum IR Flame Detector - Manual (Page 16)

DEVICE REPAIR AND RETURN
The detector is not designed to be repaired in the field.
If a problem should develop, refer to the
Troubleshooting section. If it is determined that the
problem is caused by an electronic defect, the device
must be returned to the factory for repair.
Prior to returning devices, contact the nearest local
Detector Electronics office so that a Service Order
number can be assigned. A written statement
describing the malfunction must accompany the
returned device or component to expedite finding the
cause of the failure.
Pack the unit properly. Use sufficient packing material
in addition to an antistatic bag or aluminum-backed
cardboard as protection from electrostatic discharge.
Return all equipment transportation prepaid to the
factory in Minneapolis.
NOTE
Since the entire unit must be returned to the
factory for repair, it is highly recommended that a
complete spare be kept on hand for field
replacement to ensure continuous protection.
ORDERING INFORMATION
When ordering, refer to Table 5, Ordering Factory
Configuration. For further information on the function of
each configuration option, refer to Table 2.
ACCESSORIES
Q9033 Swivel Mount Assembly is recommended for
mounting the detector when using flexible electrical
conduit.
REPLACEMENT PARTS
Part Number Description
001680-001 Window cleaner squeeze bottle
(package of six bottles)
006967-001 oi plate kit
107427-049 O-ring
400525-006 Bolts (2)
005143-001 Silicone-free grease
For assistance in ordering a system to fit your
application, please contact:
Detector Electronics Corporation
6901 West 110th Street
Minneapolis, Minnesota 55438 USA
Operator: (952) 941-5665 or (800) 765-FIRE
Customer Service: (952) 946-6491
Fax: (952) 829-8750
Web site: www.detronics.com
E-mail: [email protected]
14
Table 5—Ordering Factory Configuration Options
Option Available Configurations
Optical Integrity ( oi) * Automatic oi/manual oi
• Manual oi (only)
Fire Relay • Latching
* Non-latching
• Normally Energized
* Normally De-Energized
* Normally Open
• Normally Closed
Fault Relay • Latching
* Non-latching
* Normally Energized
* Normally Open
• Normally Closed
4 to 20 mA Output • No Fire and Fault Relay Contacts
* Standard Configuration