ECOXGEAR TWCCDRW: Tunewriter II - Manual (Page 13)

13
A Turntable
B Screw fixing the turntable for transportation
Before use, completely loosen the screw by turning it clockwise with a coin or screwdriver.
When you transport the unit, turn the screw counterclockwise to secure the turntable.
C Cue-lever
Use this lever to lift the tone arm.
D Tone arm holder
E Speed selector
F Tone arm
G 45 RPM adaptor
Remote Control Unit can operate the unit from a distance. When operating the remote
control unit, point it towards the front panel of the unit.
• Even if the remote control unit is operated within the effective range, remote control opera-
tion may be impossible if there are any obstacles between the unit and the remote control.
• If the remote control unit is operated near other appliances which generate infrared rays,
or if other remote control devices using infrared rays are used near the unit, it may operate
incorrectly. Conversely, the other appliances may operate incorrectly.
Remote Control Unit
Battery Installation
1. Remove the battery compartment cover.
2. Insert two “AAA” dry batteries. Make sure that the
batteries are inserted with their positive “+” and “-”
poles positioned correctly.
3. Close the cover.