ECOXGEAR TWCCDRW: Tunewriter II - Manual (Page 6)

6
1. Choose unit installation location carefully. Avoid placing it in direct sunlight or close to
a source of heat. Also avoid locations subject to vibrations and excessive dust, cold or
moisture. Keep away from sources that hum, such as transformers or motors.
2. Do not open the cabinet as this might result in damage to the circuitry or electrical shock,
if a foreign object should get inside the set, contact your dealer.
3. Be sure not to handle discs with dirty fingers. Never insert a disc that has a crack on the
surface.
4. When removing the power plug from the wall outlet, always pull directly on the plug,
never pull the cord.
5. To keep the laser pickup clean, do not touch it, and do not forget to close the disc tray.
6. Do not attempt to clean the unit with chemical solvents as this might damage the finish.
Use a clean, dry cloth.
7. In order to shut off the power to this product completely, unplug the power cord from
the wall outlet. Be sure to unplug the unit if you do not intend to use it for an extended
period of time, such as while on a vacation.
8. Keep this manual in a safe place for future reference.
When the player (or a compact disc) is moved from a cold to a warm place or is used after a
sudden temperature change, there is a danger of condensation. Water vapor in the air could
condense on the mechanism or the laser pickup. If droplets of water form on these parts, cor-
rect playback may be impossible because the laser cannot read the information from the disc
correctly. To prevent this, if you are going to use the player in a condition where condensa-
tion could occur, you should leave the player for 1 or 2 hours after plugging it into an AC
outlet depending on the amount of condensation. If this is correctly done, the player will
stabilize at the temperature of its surroundings.
Handling Records
Before Use
Beware of Condensation
• Do not touch the record’s grooves. Only handle records by the ledges or the label with
clean hands. Dirty Handling can leave a residue on the record’s surface that will gradually
deteriorate the quality of your record.
GROOVES
LABEL
LABEL