ECOXGEAR TWCCDRW: Tunewriter II User Manual

Page 8

Advertising
background image

8

Discs

• “CD-R” and “CD-RW” discs designed for computer systems and properly recorded by a

computer are playable, but this unit cannot record, finalize nor erase them.

• Depending on the quality of the disc and the condition of the recording, some CD-R/

CDRW disc may not be playable.

• Always place the disc on the disc tray with the label side up (compact discs can be played or

recorded only on one side)

• To move a disc from its storage case, press down on the center of the case and lift the disc

out, holding it carefully by the edges.

• Should the disc become dirty, wipe the surface from the center hole outward towards the

outer edge with a soft, dry cloth.

• Never use chemicals such as record spray, antistatic sprays or fluid, benzine or thinner to

clean the discs. Such chemicals will do irreparable damage to the disc’s plastic Surface.

• Discs should be returned to their cases after use to avoid dust and scratches that could cause

the laser to “skip”.

• Do not expose discs to direct sunlight or high humidity and temperature for extended

periods. Long exposure to high temperatures will wrap the disc.

• Printable CD-R and CD-RW discs are not recommended, as the label side might be sticky

and damage the unit.

• Use a soft oil-based felt-tipped pen to write the information on the label side. Never use a

Please use CD, CD-R and CD-RW discs bearing the “DIGITAL AUDIO” mark.

This unit CANNOT RECORD CD-R and CD-RW discs

designed for computer systems.

Advertising