ECOXGEAR TWCCDRW: Tunewriter II - Manual (Page 18)

18
2. Select the source by pressing the corresponding button.
3. Rotate the VOLUME knob clockwise to adjust the desired sound level.
4. Listening through Earphones/Headphones (Not included).
The sound from the speakers will shut off.
LISTENING TO THE RADIO
1. Select FM or AM using the FM/AM button.
2. Tune to the desired frequency.
The TUNED INDICATOR lights when a station is correctly tuned in.
The STEREO INDICATOR lights when an FM stereo broadcast is tuned in.
The volume reading 1-63 but no sound hear until 20, the volume will change along with the
number.
If the reception is poor
AM Broadcast
Adjust the unit’s location to find the best position for AM stations.
FM Broadcast
Extend and turn around the FM antenna so that you can receive the station clearly.