ECOXGEAR TWCCDRW: Tunewriter II - Manual (Page 32)

32
STEP 6:
If PHONO is selected in step 1, gently
lower the tone arm onto the edge of the
record (or the track to be recorded).
If AUX is selected in step 1, play the source
to be recorded.
When the playback of the source has been
finished, press the STOP ( ) button
to stop recording.
When the rotation of the turntable stops, the recording will stop automatically. But to
prevent unwanted noise from the tone arm being recorded, stop the recording manually by
using the STOP button.
STEP 7: START RECORDING
Press the PLAY/ PAUSE button to start recording.
To stop recording
Press the STOP button to stop recording. The
display will show “Busy”, after the “Busy” disappears,
press the CD button and, the display will show the
record track time.
STEP 5: SELECT RECORDING LEVEL (optional)
If necessary, adjust the recording level using the REC LEVEL knob , the display will
show from 00 to 79.
Play the source to be recorded and adjust the recording level so that the loudest sound does
not exceed the “OVER” indicator on the peak level meter.
15
12
To suspend recording temporarily (pause mode)
Press the PLAY/PAUSE button. “Busy” briefly appears on the
display, and the recording is paused.
To restart recording, press the PLAY/PAUSE button again.
12
13
13