Black Box LR1102A-T1/E1 User Manual

Page 111

Advertising
background image

PIM Configuration

113

To configure the threshold-dr option such that the data from S addressed to G must exceed an average of 1500 KBytes per
second before an SPT switch is initiated. If this router is a DR for the pair (S,G), then the same data must exceed an average of
1500 KBytes per second before an SPT switch is initiated. The period over which the average will be calculated will be the
mrt-period

times the mrt-spt-mult, or 60 seconds.

Blackbox/configure/ip/pim> threshold-rp 1500

To specify that the message checksum will be calculated over the entire encapsulated packet, rather than just over the Register
message header, enter:

Blackbox/configure/ip/pim> whole-packet-checksum

The following example configures a global assert-holdtime value of 600.

Blackbox/configure/ip/pim> assert-holdtime 600

To set the holdtime to 60 seconds, enter:

Blackbox/configure/ip/pim> hello-holdtime 60

To set the hello interval time to 145 seconds, enter:

Blackbox/configure/ip/pim> hello-interval 145

To set the priority to 15, enter:

Blackbox/configure/ip/pim> hello-priority 15

To set the holdtime to 30 seconds, enter:

Blackbox/configure/ip/pim> join-prune-holdtime 30

To send messages every five minutes, enter:

Blackbox/configure/ip/pim> join-prune-interval 300

To check the router table every 15 seconds, enter:

Blackbox/configure/ip/pim> mrt-period 15

To set the

mrt-spt-mult

value to be ten times that of the

mrt-period

value, enter:

Blackbox/configure/ip/pim> mrt-spt-mult 10

To set the time out (S, G) entries at 5 times the mrt-period value, enter:

Blackbox/configure/ip/pim> mrt-stale-mult 5

To display PIM global configuration settings, enter:

Blackbox/configure> display ip pim global
PIM: Enabled
Mode: Sparse
Timers:
Hello Interval: 145
Hello Hold Time: 60
Hello Priority: 15

Join/Prune Interval: 300
Join/Prune Hold Time: 30
Assert Hold Time: 200
Probe Period: 15
Register Suppress Timeout: 90
MRT Interval: 15
MRT SPT Multiplier : 10
MRT Stale Multiplier: 5
Thresholds:
Threshold DR: 2400
Threshold RP: 1500
RP Switch Immediate: enabled
DR Switch Immediate: enabled
Whole packet checksum: enabled
SSM Range: 224.20.12.1 24
Blackbox/configure>

Advertising
This manual is related to the following products: