Black Box LR1102A-T1/E1 - Manual (Page 112)

Black Box LR11xx Series Router Configurations Guide
114
To display information for all interfaces, enter:
Blackbox/configure> display ip pim interface all
To see all IP PIM interface information for Ethernet1, enter:
Blackbox/configure/ip/pim/interface ethernet1> display ip pim interface ethernet1
To display IP PIM statistics for ethernet1, enter:
Blackbox/configure/ip/pim/interface ethernet1> display ip pim statistics
PIM Statistics:
Total PIM msgs recvd 0 (0 bytes)
Recvd msgs too short 0
Recvd msgs bad checksum 0
Recvd msgsg bad version 0
Recvd register msgs 0 (0 bytes)
Recvd registers wrong iif 0
Recvd bad registers 0
Sent register msgs 0 (0 bytes)
Blackbox/configure/ip/pim/interface ethernet1>
To display information on PIM neighbors, enter:
Blackbox/configure> display ip pim neighbors
Neighbor Interface Uptime Expires Hello Priority
--------------- ------------- -------- ---------------- --------------
Blackbox/configure>
To display RP information, enter:
Blackbox/configure> display ip pim rp
Group/Mask RP
------------------ ---------------
224.0.0.0/4 10.10.1.1
Blackbox/configure>
To view RP-set information, enter:
Blackbox/configure> display ip pim rp-set
Group/mask Src/RP Pri Uptime Expires
---------- ------ --- ------ -------
224/4 10.10.1.1 1 Static RP
Dependencies: None
Blackbox/configure>
To view PIM counters, enter:
Blackbox/configure> display ip pim statistics
PIM Statistics:
Total PIM msgs recvd 0 (0 bytes)
Recvd msgs too short 0
Recvd msgs bad checksum 0
Recvd msgsg bad version 0
Recvd register msgs 0 (0 bytes)
Recvd registers wrong iif 0
Recvd bad registers 0
Sent register msgs 0 (0 bytes)
Blackbox/configure>
To display PIM timer information, enter: