Black Box LR1102A-T1/E1 - Manual (Page 30)

Black Box LR11xx Series Router Configurations Guide
32
Black Box1> show firewall policy corp detail
Policy with Priority 1000 is enabled, Direction is inbound
Action permit, Traffic is transit
Logging is disable
Source Address is 10.0.2.0/24, Dest Address is 10.0.1.0/24
Source Port is any, Dest Port is any, any
Schedule is disabled, Ftp-Filter is disabled
Smtp-Filter is disabled, Http-Filter is disabled
Rpc-Filter is disabled, Nat is disabled
Max-Connections 1024, Connection-Rate is disabled
Policing is disabled, Bandwidth is disabled
Bytes In 0, Bytes Out 0
Policy with Priority 1022 is enabled, Direction is outbound
Action permit, Traffic is self
Logging is disable
Source Address is any, Dest Address is any
Source Port is any, Dest Port is any, any
Schedule is disabled, Ftp-Filter is disabled
Smtp-Filter is disabled, Http-Filter is disabled
Rpc-Filter is disabled, Nat is disabled
Bytes In 0, Bytes Out 0
Policy with Priority 1023 is enabled, Direction is inbound
Action permit, Traffic is self
Logging is disable
Source Address is any, Dest Address is any
Source Port is any, Dest Port is any, any
Schedule is disabled, Ftp-Filter is disabled
Smtp-Filter is disabled, Http-Filter is disabled
Rpc-Filter is disabled, Nat is disabled
Bytes In 0, Bytes Out 0
Policy with Priority 1024 is enabled, Direction is outbound
Action permit, Traffic is transit
Logging is disable
Source Address is any, Dest Address is any
Source Port is any, Dest Port is any, any
Schedule is disabled, Ftp-Filter is disabled
Smtp-Filter is disabled, Http-Filter is disabled
Rpc-Filter is disabled, Nat is disabled
Max-Connections 1024, Connection-Rate is disabled
Policing is disabled, Bandwidth is disabled
Bytes In 11258, Bytes Out 5813
Step 9: Repeat steps 1 - 8 with suitable modifications on Black Box2 prior to passing traffic.
Step 10: Test the IPSec tunnel between Black Box1 and Black Box2 by passing traffic from the 10.0.1.0 to the 10.0.2.0
network