1 mlppp configuration, 1 configure the black box lr1114a system at site 1, 2 ppp and mlppp configuration – Black Box LR1102A-T1/E1 User Manual
Page 62: 3 hdlc configuration, Mlppp configuration, Configure the black box lr1114a system at site 1, Ppp and mlppp configuration, Hdlc configuration
Black Box LR11xx Series Router Configurations Guide
64
9.1.1 MLPPP Configuration
9.1.1.1 Configure the Black Box LR1114A System at Site 1
Blackbox> configure term
Blackbox/configure> interface bundle ToMain
Blackbox/configure/interface/bundle> link t1 1-4
NOTE
MLPPP is not explicitly configured via the encapsulation command. Instead, multilink PPP is automatically invoked when a bundle
with PPP encapsulation has two or more T1 links.
Blackbox/configure/interface/bundle> encap ppp
Blackbox/configure/interface/bundle> mlppp seg_threshold LR1114A differential_delay
50
Blackbox/configure/interface/bundle> ip addr 192.168.1.2 255.255.255.0
Blackbox/configure/interface/bundle> exit
9.1.2 PPP and MLPPP Configuration
9.1.2.1 Configure the Black Box LR1104A System at the Main Site
Blackbox/configure> interface bundle ToSite1
Blackbox/configure/interface/bundle> link ct3 1 5-8
Blackbox/configure/interface/bundle> encap ppp
Blackbox/configure/interface/bundle> mlppp seg_threshold LR1114A differential_delay
50
Blackbox/configure/interface/bundle> ip addr 192.168.1.1 255.255.255.0
Blackbox/configure/interface/bundle> exit
Blackbox/configure> interface bundle ToSite2
Blackbox/configure/interface/bundle> link ct3 1 9
Blackbox/configure/interface/bundle> encap ppp
Blackbox/configure/interface/bundle> ppp mtu 100-250-1000 mru 100-250-1000
Blackbox/configure/interface/bundle> ip addr 192.168.2.1 255.255.255.0
Blackbox/configure/interface/bundle> exit
9.1.3 HDLC Configuration
HDLC encapsulation may be substituted for PPP between the main site and site 2
9.1.3.1 Configure the Black Box LR1104A System at the Main Site
Blackbox/configure> interface bundle ToSite2
Blackbox/configure/interface/bundle> link ct3 1 9
Blackbox/configure/interface/bundle> encap hdlc
Blackbox/configure/interface/bundle> hdlc keepalive 20
Blackbox/configure/interface/bundle> ip addr 192.168.2.1 255.255.255.0
Blackbox/configure/interface/bundle> exit
NOTE
In the above command sequence, the HDLC keepalive time interval was changed from its default setting of 10 seconds to 20
seconds