Black Box LR1102A-T1/E1 - Manual (Page 120)

Black Box LR11xx Series Router Configurations Guide
122
Figure 39 Assigning VLAN Identifiers
Configuration for Figure 39:
22.1.4.1 Create bundle VLANtest
LR1104A> conf t
LR1104A/configure> interface bundle VLANtest
LR1104A/configure/interface/bundle VLANtest> link ct3 1 20-23
LR1104A/configure/interface/bundle VLANtest> encap ppp
LR1104A/configure/interface/bundle VLANtest> ip addr 200.1.1.1 255.255.255.252
22.1.4.2 Create traffic classes and assign classifications
LR1104A/configure/interface/bundle VLANtest> qos
LR1104A/configure/interface/bundle VLANtest/qos> add_class JonesInc root-out cr 3072 br 6144
LR1104A/configure/interface/bundle VLANtest/qos> add_class SmithInc root-out cr 2048 br 6144
LR1104A/configure/interface/bundle VLANtest/qos> add_class Default root-out cr 1024 br 2048
LR1104A/configure/interface/bundle VLANtest/qos> class JonesInc
LR1104A/configure/interface/bundle VLANtest/qos/class JonesInc> add_vlan_id 24
LR1104A/configure/interface/bundle VLANtest/qos/class JonesInc> exit
LR1104A/configure/interface/bundle VLANtest/qos> class SmithInc
LR1104A/configure/interface/bundle VLANtest/qos/class SmithInc> add_vlan_id 25-29
LR1104A/configure/interface/bundle VLANtest/qos/class SmithInc> exit
LR1104A/configure/interface/bundle VLANtest/qos> class Default
LR1104A/configure/interface/bundle VLANtest/qos/class Default> add_vlan_id default
LR1104A/configure/interface/bundle VLANtest/qos/class Default> exit
LR1104A/configure/interface/bundle VLANtest/qos> enable
LR1104A/configure/interface/bundle VLANtest/qos> exit 4
22.1.5Bulk Statistics
The Bulk statistics command enables users to collect statistics for every N hours (N <4 hours) and upload the statistics for every class
to an FTP server. The data is sent in an ASCII format file with three sections. The first section includes the upload time, system IP
address, sample interval in minutes, and the upload interval in minutes. The second section includes class-based statistics for all
bundles configured and enabled with QoS. The third section includes class-based statistics. Empty lines and header lines in the file
start with the “#” character. The bundle statistics start with the character “B,” and class statistics start with the character “C.” These
designations allow easier parsing of the file.
Interface Bundle VLANTest
4 x T1
Bandwidth = 6144 Kbps
VLAN ID = 24
CR = 3072 Kbps
BR = 6144 Kbps VLAN ID = 25-29
CR = 2048 Kbps
BR = 6144 Kbps VLAN ID = default
CR = 1024 Kbps
BR = 2048 Kbps
SmithInc JonesInc Default Traffic Classes