ElmoMC Gold Line Digital Servo Drives-Gold Solo Guitar - Manual (Page 15)

Gold Solo Guitar Installation Guide
MAN-G-SOLGUTIG-EC (Ver. 1.100)
|Mounting the Gold Solo Guitar| www.elmomc.com
15
Table of Contents
5.3. Mounting the Gold Solo Guitar
The Gold Solo Guitar was designed for mounting on a surface. When integrating the Gold Solo
Guitar into a device, be sure to leave about 1 cm (0.4") outward from the heat-sink to enable free
air convection around the drive. If the Gold Solo Guitar is enclosed in a metal chassis, we
recommend that the Gold Solo Guitar be screw-mounted to it to help with heat dissipation. The
Gold Solo Guitar has screw-mount holes on each corner of the heat-sink for this purpose – see
below.
Figure 3: Mounting the Gold Solo Guitar