Sto connector (j26), Source mode plc voltage level – ElmoMC Gold Line Digital Servo Drives-Gold Solo Guitar User Manual
Page 48
Advertising
Gold Solo Guitar Installation Guide
MAN-G-SOLGUTIG-EC (Ver. 1.100)
|STO Connector (J26)
48
6.8. STO Connector (J26)
See Chapter 9 in the in the MAN-G-Panel Mounted Drives Hardware manual for full details.
Pin (J26)
Signal
Function
1
STO1
STO 1 input (default 24 V)
2
STO2
STO 2 input (default 24 V)
3
STO_RET
STO signal return
Pin Positions
Cable Connector
3-Pin Molex Plug
This cable is included in the cable
kit described in Section 3.1.1
Table 9: STO Input Pin Assignments
The following circuits describe the STO wiring options.
6.8.1.1.
Source Mode PLC Voltage Level
Figure 33: STO Input Connection – PLC Source Option
Advertising