Shared supply – ElmoMC ExtrIQ Digital Servo Drives-Hornet User Manual
Page 29
Advertising
Hornet and Bee Installation Guide
Installation
MAN-HRBEIG (Ver. 1.304)
29
3.8.3.
Shared Supply
A "Main" DC Power Supply can be designed to supply power to the drive's Logic as well as to
the Main Power (see Figure 8). If backup functionality is required (for storing control
parameters in case of power-outs) an additional backup supply can be connected by
implementing 'diode coupling' (see the Auxiliary Backup Supply in Figure 10).
Figure 10: Shared Supply Connection Diagram
Advertising
This manual is related to the following products: