Enerpac TQ-700E - Manual (Page 2)

2
3.0 PRODUCT DATA
3.1 Specifi cations
Model
Motor
Size *
Max.
Operating
Pressure
Motor
Electrical
Specifi cations
Output Flow Rate
Sound
Level
Relief Valve
Adjustment
Range
Approx.
Weight
w/o oil
HP
[kW]
psi
[bar]
Volts-Phase-Hz
[Volt Range]
1st
Stage
in 3 /min[l/min]
2nd
Stage
in 3 /min[l/min]
3rd
Stage
in 3 /min[l/min]
dBA
psi
[bar]
lbs.
[kg]
TQ-700B
1.0
[0,75]
10,000
[700]
115-1-60
[108 V - 152 V ]
380
[5.25]
98
[1.61]
38
[0.63]
75-79
1,400-10,000
[97-700]
68
[30.8]
TQ-700E
1.0
[0,75]
10,000
[700]
230-1-50
[170 V - 305 V ]
320
[5.25]
82
[1.34]
30
[0.49]
82-85
1,400-10,000
[97-700]
66
[30]
TQ-700I
1.0
[0,75]
10,000
[700]
230-1-60
[195 V - 305 V ]
380
[5.25]
98
[1.61]
38
[0.63]
75-79
1,400-10,000
[97-700]
66
[30]
3.2 Performance Charts (Oil Flow and Current vs. Pressure)
WARNING: Only use hydraulic torque wrenches in a coupled system.
Never use a torque wrench with unconnected couplers. If the torque
wrench becomes extremely overloaded, components can fail
catastrophically causing severe personal injury.
IMPORTANT: Hydraulic equipment must only be serviced by a
qualifi ed hydraulic technician. For repair service, contact the Authorized
ENERPAC Service Center in your area. To protect your warranty, use
only ENERPAC oil.
WARNING: Immediately replace worn or damaged parts with genuine
ENERPAC parts. Standard grade parts will break causing personal injury
and property damage. ENERPAC parts are designed to fi t properly and
withstand high loads.
WARNING: Do not use electric pumps in an explosive atmosphere.
Adhere to all local and national electrical codes. A qualifi ed electrician
must do installation and modifi cation.
WARNING: Keep hands clear of moving parts and pressurized
hoses.
WARNING: These pumps have internal factory adjusted relief valves,
which must not be repaired or adjusted except by an Authorized
Enerpac Service Center.
WARNING: To prevent damage to pump electric motor, check
specifi cations. Use of incorrect power source will damage the motor.
Notes: Oil fl ow, pressure and current draw will vary, depending on power supply, application, pump condition and other factors.
     
















     
















     
















Model TQ-700B Model TQ-700E Model TQ-700I
Oil flow
(in
3
/min)
▶
Oil flow
(in
3
/min)
▶
Oil flow
(in
3
/min)
▶
Pressure (psi) ▶ Pressure (psi) ▶ Pressure (psi) ▶
Flow (in 3 /min) Flow (in 3 /min) Flow (in 3 /min)
Current
(amps)
▶
Current
(amps)
▶
Current
(amps)
▶
Current (amps) Current (amps) Current (amps)