Environmental Express SPE-Express with Cover - Manual (Page 15)

Environmental
Express,
Inc.
800.343.5319/843.881.6560 14
Keyboard shortcuts are available for each of the nine options on the SPE-Express Main Screen:
• “Log Out”: Press to log out, or press the End key.
• “Change Password”: Press to change your password, or press the F2 key.
• “Edit Users”: Press to edit users, or press the F3 key.
• “Configuration”: Press to launch the system configuration utility, or press the F4 key.
• “Method Creation”: Press to launch the method creation screen, or press the F5 key.
• “Operator Test”: Press to launch the operator test screen, or press the F6 key.
• “Data Viewer”: Press to launch the data viewer screen, or press the F7 key.
• “Manual Screen”: Press to launch the manual interface screen, or press the F8 key.
• “Exit”: Press to exit the program, or press the Escape key.
2.3.1 Log-In Screen
To Log In:
• Press the “Log In” button on the Environmental Express SPE-Express Main Screen, or press F1.
• Enter your valid user name in the “User Name” field. Default user name is admin (all lower case).
• Enter your valid password in the “Password” field. Default password is admin (all lower case).
• “OK”: Press to log in or press the Enter key.
• “Cancel”: Press to exit, or press the Escape key.
2.3.2 Change Password Screen
• Press “Change Password” on the Main Screen or press F2.
• Enter your old password in the “Old Password” field.
• Enter your desired new password in the “New Password” field.
• Re-enter your new password in the “Confirm New Password” field.
Environmental Express • 9 800.745.8218 / 843.576.1147 / www.environmentalexpress.com
SPE-XPress Getting Started Setting Up Your Software / Log In / Change Password
The following pages detail the
software functions available to the
operator. Before operating the
SPE-XPress, the operator is
required to:
Log In to your software •
Configure your hardware •
Initiate a System Flush •
2.3.a. Log In Screen
To Log In:
Press the “Log In” button on •
the Environmental Express
SPE-XPress Main Screen, or
press F1.
Enter your valid user name in •
the “User Name” field. Default
user name is admin (all lower
case).
Enter your valid password in •
the “Password” field. Default
password is admin (all lower
case).
“OK”: Press to log in or press •
the Enter key.
“Cancel”: Press to exit, or press •
the Escape key.
Once the user has logged in,
the next step is to configure the
hardware (page 12).
Figure 6
Figure 7
2.3.b. Change Password Screen
Press “Change Password” on the •
Main Screen or press F2.
Enter your old password in the •
“Old Password” field.
Enter your desired new password •
in the “New Password” field.
Re-enter your new password •
in the “Confirm New Password”
field.
Press “OK” to accept the •
password change, or press the
Enter key.
Press “Cancel” to exit, or press •
the Escape key.
Environmental Express • 9 800.745.8218 / 843.576.1147 / www.environmentalexpress.com
SPE-XPress Getting Started Setting Up Your Software / Log In / Change Password
The following pages detail the
software functions available to the
operator. Before operating the
SPE-XPress, the operator is
required to:
Log In to your software •
Configure your hardware •
Initiate a System Flush •
2.3.a. Log In Screen
To Log In:
Press the “Log In” button on •
the Environmental Express
SPE-XPress Main Screen, or
press F1.
Enter your valid user name in •
the “User Name” field. Default
user name is admin (all lower
case).
Enter your valid password in •
the “Password” field. Default
password is admin (all lower
case).
“OK”: Press to log in or press •
the Enter key.
“Cancel”: Press to exit, or press •
the Escape key.
Once the user has logged in,
the next step is to configure the
hardware (page 12).
Figure 6
Figure 7
2.3.b. Change Password Screen
Press “Change Password” on the •
Main Screen or press F2.
Enter your old password in the •
“Old Password” field.
Enter your desired new password •
in the “New Password” field.
Re-enter your new password •
in the “Confirm New Password”
field.
Press “OK” to accept the •
password change, or press the
Enter key.
Press “Cancel” to exit, or press •
the Escape key.