ETC Desire Series v1.6.0 User Manual - Manual (Page 15)

Quick Start 9
To select a Quick Color:
Step 1: Press the [ ] to access the Presets and Sequences screen.
Step 2: Scroll to Quick Color within the Presets and Sequences screen.
Step 3: Press [ ].
Step 4: Scroll to Color and press [ ].
Step 5: Press [ ] or [ ] to select the desired color
Step 6: Press [ ] to commit the selection.
Step 7: Scroll to Intensity and press [ ].
Step 8: Press and hold [ ] or [ ] to adjust the fixture’s intensity.
Step 9: Press [ ] to commit the selection.
• To set the Intensity to 0, press the [ ]. Pressing [ ] a second time will
return the fixture to its previously set intensity.
• If power to the fixture is lost while in Quick Color mode, the fixture will return
to the Quick Color menu when power is restored.
Quick Setups Menu
Various pre-programmed combinations of operational settings are available to quickly get
you started. These settings are specifically created for different situations and are easily
accessible on the fixture’s user interface. Individual settings within each quick setup can be
accessed via the Advanced menu in order to take advantage of all the possible control
features.
Quick Setups (Vivid, Lustr+, Fire and Ice, Studio HD)
Step 1: On the Main Menu, scroll to Quick Setups.
Step 2: Press [ ].
Step 3: Scroll to the desired setup and then press [ ].
An asterisk (*) next to the setup name indicates that setup is active.
Step 4: Press [ ] to return to the home screen.
The top line of the home screen displays the name of the active setup.
Quick Setup Description Profile Features
General
General lighting:
All-purpose settings for most lighting
applications.
The default setup except for fixtures with
Studio LED arrays. The Studio fixtures
return to the General setup after a reset.
Direct
control
• Standard dimming curve
• Regulated output for brightness
consistency
• Individual color channels plus master
intensity control
• Allows for native color space
crossfades
• Output is NOT color-calibrated
Stage
Theatrical lighting:
Tungsten-like performance and precise
color-control.
Uses the most DMX channels of all quick
setups.
HSI
Plus 7
enabled
• Incandescent dimming curve
• Regulated output for brightness
consistency
• White point: 3200K