ETC Desire Series v1.6.0 User Manual - Manual (Page 26)

20 Desire Series v1.6.0 User Manual
Installation
Mounting Hardware
Four options are available for mounting Desire fixtures.
• Yoke with C-clamp
• Floor stand
• Canopy (D22)
• Track mount (D22)
Installing the Floor Stand
The floor standing yoke assembly replaces the included standard yoke so that the fixture
can be placed on a floor and tilted to the desired angle.
Figure-2.1 Fixture with Floor Stand.
Step 1: Remove the yoke locking knob with the flat washer.
Step 2: Remove the yoke bolts and flat washers that attach the yoke on each side of the
fixture.
Step 3: Attach the yoke and floor standing yoke assembly to the fixture with the two yoke
bolts and two flat washers.
Step 4: Insert the yoke locking knob and flat washer and tighten.
Installing D22 Canopy and Track
For detailed installation information, reference the Desire Series D22 Installation Guide.
ETC manuals are available for download at http://www.etcconnect.com/downloads.aspx .
Yoke locking knob
Yoke bolt
Floor standing yoke
Main
yoke