ETC Desire Series v1.6.0 User Manual - Manual (Page 53)

4
Operation 47
Fan Control (D60)
The fan on D60 fixtures can be forced on via DMX control or by adjusting settings under the
Advanced Settings menu. For more information, see Fan Control (D60), page 35 .
Thermal Shutdown Warning
Displayed as OverTemp, it is what the fixture does to visibly warn you that it has become
overheated and has gone into a shut-down status, which is maintained until the fixture
returns to a safe operating temperature. For more information, see OverTemp, page 75 .
Data Loss Behavior
What happens to the fixture's output when the external control signal is lost. For more
information, see Data Loss, page 52 .
Status Indicators
Status Indicators are on by default. For more information, see Status Indicators, page 74 .