ETC Desire Series v1.6.0 User Manual - Manual (Page 34)

28 Desire Series v1.6.0 User Manual
Connections
All connections and user controls are located on the back of the fixture, depending on the
model.
Figure-2.6 Power and DMX Connections on Back of D40 or D60 Fixture.
Figure-2.7 Power and DMX/RDM Connections on Back of the D22 Portable Fixture.
Depending on the fixture model, connect AC input power and DMX data cables to the
appropriate ports. Connect the incoming DMX data cable to the DMX Input connector. If you
are daisy-chaining the data to other fixtures or DMX-controlled devices, connect the next
DMX cable to the DMX Thru connector. Up to 32 fixtures can be connected together into a
data daisy-chain.
For information about the user interface, refer to User Interface Overview, page 40 .
PUSH
Power In
Power Thru
DMX In
DMX Thru
Indicator lights
PUSH
DMX/RDM
In
DMX/RDM
Thru
Indicator lights
Power In