Labnet Z306 Hermle Universal Centrifuge - Manual (Page 12)

PRODUCT DESCRIPTION
6 Z306 Instruction manual.docx
© Hermle Labortechnik GmbH
1.5.5 Following rules must strictly be adhered to:
• Do not operate the centrifuge in case it is not installed correctly.
• Do not operate the centrifuge when dismounted (e.g. without housing).
• Do not run the centrifuge when mechanical or electrical assembly groups have been
tampered with unauthorized persons.
• Do not use accessories such as rotors and buckets, which are not exclusively approved by
HERMLE Labortechnik GmbH, except commercially available centrifuge tubes made of glass
or plastic.
• Do not spin extremly corrosive substances, as they may cause material damages and impair
mechanical resistance.
• Do not operate the centrifuge with rotors or buckets, which show any signs of corrosion or
mechanical damage.
The manufacturer is responsible for safety and reliability of the centrifuge, only if:
• the unit is operated in accordance with this instruction manual.
• modifications, repairs or other adjustments are performed by HERMLE-authorized personnel
and the electrical installation of the related location corresponds to the IEC-regulations.
1.5.6 Warranty
The centrifuge has been subjected to thorough testing and quality controls. In the unlikely case of
any manufacturing faults occurring, the centrifuge and rotors are covered by warranty for a period of
two years from date of delivery. This warranty becomes invalid in case of mishandling, damage and
negligence and further in case of usage of inappropriate spare parts and / or accessories or
unauthorized modification of the unit.
Technical modification rights are reserved by the manufacturer in respect to technical
improvement!