Lenze Backup & Restore Data saving and restoring - Manual (Page 25)

Lenze · Backup & Restore · Software Manual · DMS 1.3 EN · 04/2014 · TD17
25
4 Creating a backup & carrying out recovery
4.1 Creating a backup
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
4.1.3 Alternative: Creating a backup with the »WebConfig«

Tip!
For Cabinet controllers, use the »WebConfig« without an external panel.

Note!
When operating the »WebConfig« it must be observed that the values from the
controller are reimported if the Update button is clicked.
By clicking on Accept you overwrite the values previously saved (only the values that
have changed are overwritten).