Lenze Backup & Restore Data saving and restoring - Manual (Page 32)

4 Creating a backup & carrying out recovery
4.2 Carrying out restore and auto-restore
32
Lenze · Backup & Restore · Software Manual · DMS 1.3 EN · 04/2014 · TD17
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
4.2.5 Carrying out an auto-restore
An auto-restore serves to automatically save identical backup data to multiple controllers.
Auto-restore with »Backup & Restore« - software application
In order to be able to perform an auto-restore, a one-time backup of the desired controller the data
bases of which you want to copy must be effected.
 Creating a backup & carrying out recovery ( 21)
A USB stick configured for auto-restore can afterwards be used for an optional number of auto-
restore processes.

How to prepare a USB stick for an auto-restore:
The individual steps of an Auto-Restore are identical to those of a Restore.
 Carrying out restore and auto-restore ( 28)
1. Select the Auto-Restore command from the selection list to start the process.
2. Connect the USB stick to the desired controller.
3. Restart controller (with connected USB stick) by mains switching.
The restore is automatically carried out during the boot-up process.
4. After the boot-up of the controller: Remove the USB stick from the controller.

Tip!
This process can be repeated with an optional number of controllers.
Alternative: WebConfig - web interface

How to prepare a USB stick for an auto-restore:
The individual steps of an Auto-Restore are identical to those of a Restore.
 Carrying out restore and auto-restore ( 28)
1. Select the Auto-Restore command from the selection list to start the process.
2. Connect the USB stick to the desired controller.
3. Restart controller (with connected USB stick) by mains switching.
The restore is automatically carried out during the boot-up process.
4. After the boot-up of the controller: Remove the USB stick from the controller.

Note!
• When executing an Auto-restore, a restore is carried out directly - no backup of the
system is created before.
• An auto-restore is an optimised process for carrying out a series commissioning.