Loadstar Sensors DS-3000 Digital Load Cell Display & Controller - Manual (Page 36)

DS-3000U DS3000 User Guide
Loadstar Sensors, Inc. Page: 36 / 48 033-01419 Rev. 4
12. Press enter to leave this field
13. Press menu till option page is displayed
14. Press down to trgt, press enter until trgt b is displayed. This enables the remote input to
tare the DS-3000 whenever the external contacts are closed, and reset the measurement state
machine at the beginning of each new cycle.
15. Now exit programming mode: Press mode until the run entry
16. Then press enter to return to run mode.
17. Once in run mode, the program is now operational.