Oyen Digital DATATALE RS-M4T 4-BAY THUNDERBOLT - Manual (Page 17)

17
CONNECTING THE RAID SYSTEM TO A HOST
COMPUTER
To connect the RAID System, please complete the following steps:
The Thunderbolt
TM
technology is designed to control power supply/energy-
saving and time management between the host computer and connected
Thunderbolt
TM
-compatible devices. Therefore, both the External Power Supply
and the Thunderbolt
TM
Cable need to be connected with the RAID System before
the RAID System can be powered “ON”.
1. First, connect the AC/DC Power Adapter (External Power Supply).
DC IN
2. Then, insert both ends of the Thunderbolt
TM
Cable(s) into the corresponding
port of the RAID System and the host computer.
DC I
N