Oyen Digital DATATALE RS-M4T 4-BAY THUNDERBOLT - Manual (Page 38)

38
4. Once the RAID Creation process is completed, the RAID MASTER will
display a Popup Window stating, “RAID mode successfully created!” Click
on the “OK” icon to confirm and finish the process.
If the new RAID Set creation has failed, the RAID MASTER will display a
Popup Window stating, “RAID mode creation failed!” Click on the “OK” icon to
confirm and double check on the Inserted Disk(s) before restarting the process.
5. Now, the newly created RAID Set will appear under the RAID Set list
reflecting basic information. The chosen Disks for the new RAID Set will
disappear and only the available (Valid) Disk(s) under Select Disk(s) will
appear. The newly created RAID Set is now ready for usage in the RAID
System!