Oyen Digital DATATALE RS-M4T 4-BAY THUNDERBOLT - Manual (Page 39)

39
RAID CONFIGURATIONS: DELETE AN EXISTING RAID
SET
To delete an existing RAID Set for the inserted Disk(s) in the RAID System,
please complete using the following steps:
Deleting an existing RAID Set will erase all data stored on the Disk(s). If there
are saved data in the Disk(s), please remember to backup all the data before
deleting the existing RAID Set.
1. Click on the Configurations icon and select the options based on
preferences by following the steps in the picture.
A list of existing RAID Set(s) should appear for the inserted Disk(s). If the
preferred RAID Set does not appear on the list, please restart/connect the RAID
System and the host computer.
2. Then, click on the Apply icon to begin.
3. Once begin, the RAID MASTER will display a Popup Window stating,
“RAID Mode creation/deletion will erase all previously-stored data in the
Disk(s)! Are you sure you want to Delete RAID?” Click on the Yes icon to
confirm and continue the process.