Oyen Digital DATATALE RS-M4T 4-BAY THUNDERBOLT - Manual (Page 7)

7
System Requirement
To use the RAID System, the minimum system configuration in the host
computer requires the following:
1G of RAM or higher
Mac OS X 10.7 or higher
Windows Vista, 7, 8, or Windows Server 2008
Chrome 18, FireFox 11, Safari 5.1, Opera 11.61, IE 9 or higher
One available Thunderbolt
TM
port
Install appropriate Driver first before using under Windows, please go to the
Chapter “Windows OS: Plug & Play Driver” for reference.
3.5/2.5-inch SATA-compatible hard drive and/or 2.5-inch SSD are required for
the RAID System. Once the hard drive and/or SSD are formatted, the actual
available storage capacity can vary depending on the selected operating
environment (normally 5-10 % less).
Optional Accessories
SSD SmartGuider Kit (Retail package sold separately)
Thunderbolt
TM
Cable (check your dealer to see if it is included in the
package or sold separately)
Due to restrictions of each individual SSD's controller and user's host system,
not all the SSDs are compatible when utilized with the RAID System. Please see
SSD SmartGuider Kit Section for more information.