Oyen Digital DATATALE RS-M4T 4-BAY THUNDERBOLT - Manual (Page 18)

18
3. Finally, press the Power Switch to the “ON” position.
DC I
N
ON
In order for networked computers to operate properly with the RAID System,
both the host computer and the RAID System must remain “ON” at all times.
4. When connected, the Power LED light will become steadily green. If the hard
drive/SSDs are inside the RAID System, the Disk LED lights will remain
steadily white. If there are no hard drive/SSDs inside the RAID System, the
Disk LED lights will not turn on.
By using the Thunderbolt
TM
Cable, up to six Thunderbolt
TM
Technology-
compatible devices can be connected to the host computer, including: the
DataTale Thunderbolt
TM
Series, high-resolution displays, digital devices, and
much more. Please see Daisy Chain: Connecting Multiple Devices Section for
more information.