Oyen Digital DATATALE RS-M4T 4-BAY THUNDERBOLT - Manual (Page 36)

36
RAID MASTER: OPERATION
RAID CONFIGURATIONS: SET UP A NEW RAID SET
To set up a new RAID Set for the RAID System, please complete using the
following steps:
In order to change an existing RAID Set for the inserted Disks in the RAID
System, the existing RAID Set must be deleted first. Please complete the steps
under “RAID MODE: DELETE AN EXISTING RAID SET” first, and then continue
under “RAID MODE: SET UP”.
Please review under “Number of Hard Drive/SSD Supporting Each RAID
Mode” or individual “RAID Mode” sections under Glossary for more detailed
information and assistance on choosing the most suitable RAID Mode for your
needs. If the number/type of inserted Disks do not qualify for a particular RAID
Mode, that RAID Mode will not appear under Select RAID Mode list. More than
one RAID Set can be created for different Disk(s), but must be created
separately (For example, two sets of RAID 1 or combination sets of RAID 0/
RAID 1 for four Disks).
1. Click on the Configurations icon and select the available options based on
preferences by following the steps in the picture.