Oyen Digital DATATALE RS-M4T 4-BAY THUNDERBOLT - Manual (Page 41)

41
RAID CONFIGURATIONS: REBUILD A RAID SET
To Rebuild a degraded RAID Set, please complete using the following steps:
If the RAID System loses connection to the host computer, the Rebuild
process will stop. Even if the RAID System is powered off, the RAID System will
retain the Rebuild status in memory. When the RAID System is powered “on”
again, the Rebuild process will resume from the previous status.
1. Click on the Configurations icon and select the options based on
preferences by following the steps in the picture.
If an existing RAID Set is NOT dotted for Rebuild under the list of existing
RAID Set(s) for the inserted Disk(s), the RAID MASTER will display a Popup
Window stating, “Please select an existing RAID mode for rebuild”. If the
preferred RAID Set does not appear on the list, please restart/connect the RAID
System and the host computer.
2. Then, click on the Apply icon to begin.