MacDon D65 - Manual (Page 13)

FRONT AXLE
169784 11 Revision A
h. If not factory installed, attach tension link (K) to
pivot pin with 5/8 NC X 1.375 LG shoulder bolt (L),
washer (M) and locknut. Install washer (M)
between link and pin and tighten.
i. Install spring (N), tensioner bolt (O), washer (P),
nut (Q), and jam-nut (R). Spring is tensioned later.
j. The axle is now in transport position.
L
M
K
N
Q
O
P
R