MacDon D65 - Manual (Page 18)

REAR AXLES AND WHEELS
169784 16 Revision A
h. Install two 5/8 NC X 1.25 LG carriage bolts (H)
and smooth faced locknuts in lower flange. Do not
tighten.
i. Install one 5/8 NC X 1.25 LG carriage bolt (J)
through top of assembly (E) and through upper
flange of leg. Secure with smooth faced locknut.
Do not tighten.
j. Install one 5/8 NC X 1.5 LG carriage bolt (K) and
smooth faced locknut through side of the leg. Do
not tighten.
k. Tighten the four carriage bolts and torque to 150
ft·lbf (203 N·m).
l. Tighten nut (G) on hex bolt (D) and torque to
160 ft·lbf (217 N·m).
m. Tighten nut (L) and torque to 160 ft·lbf (217 N·m).
H
K
J
E
G
D
L