Step 15. install tow-bar brackets, A. endsheet brackets – MacDon D65 User Manual
Page 32
Advertising
TOW-BAR
169784
30
Revision A
STEP 15. INSTALL TOW-BAR
BRACKETS
The tow-bar is stored on the header just behind
the back-tube. It is secured to each endsheet with
a bracket and to the back-tube with two cradles.
A. ENDSHEET BRACKETS
a. At the left endsheet inboard side, install bracket
(A) on channel with two 3/8 NC X 0.75 LG
carriage bolts (B) and flanged smooth faced nuts.
b. At the right endsheet inboard side, install bracket
(C) on channel with two 3/8 NC X 0.75 LG
carriage bolts (D) and flanged smooth faced nuts.
LEFT ENDSHEET
A
2-3/16 in. (55 mm)
B
LEFT ENDSHEET
RIGHT ENDSHEEET
C
D
Advertising
This manual is related to the following products: