MacDon D65 - Manual (Page 21)

REAR AXLES AND WHEELS
169784 19 Revision A
STEP 9. INSTALL WHEELS
a. Attach the four wheels to hubs with bolts
provided in hubs.
b. Torque wheel bolts to 80-90 ft·lbf (110-120 N·m).
Refer to bolt tightening sequence illustration.
c. Check tire inflation pressure. Inflate to 65 psi
(448 kPa).
IMPORTANT
Do not exceed maximum pressure
specified on tire side wall.
d. Height adjustment procedures when the stabilizer
wheels are in field mode are provided in your
header operator’s manual.
1
2
3
4
5
6