MacDon D65 - Manual (Page 27)

LIGHTS
169784 25 Revision A
D. CONNECT HARNESS
I. NORTH AMERICA/AUSTRALIA/CIS (WITH
MODULE)
a. Remove cap from connector (A) on existing
harness and attach connector to light module
connector (B).
b. Connect light harness flat connector (C) to light
module connector (D).
c. Connect light harness square connector (E) to
light square connector (F).
d. Bundle harnesses into light fixture and secure with
plastic tie (G).
e. Attach cover (H) and tighten screws (J).
II. EUROPE (WITHOUT MODULE)
a. Remove cap from connector (K) on existing
harness and attach connector to light harness
connector (L).
b. Connect light harness square connector (M) to
light square connector (N).
c. Bundle harnesses into light fixture and secure with
plastic tie (G).
d. Attach cover (H) and tighten screws (J).
A
B
C
D
E
F
K
L
M
N
H
J
G