MacDon D65 - Manual (Page 31)

SAFETY SIGNS
169784 29 Revision A
STEP 13. INSTALL SMV SIGN
a. Remove existing bolt (A) in hose support at right
end reel arm.
b. Assemble SMV sign (B) and bracket (C) with a 3/8
NC X 0.75 LG carriage bolt (D) and smooth face
locknut. Do not tighten.
c. Attach SMV sign and bracket assembly (E) to
hose support with a 3/8 NC X 3.0 LG hex head
bolt (F).
d. Tighten hardware.
STEP 14. INSTALL DIVIDER ROD
STORAGE BRACKET
a. Retrieve divider rod storage bracket from kit.
b. Locate bracket (G) on right endsheet brace as
shown and install 3/8 NC X 0.75 LG carriage bolt
(H) and smooth face locknut.
c. Store divider rods (J).
A
B
D
C
E
F
G
H
J