RKI Instruments GX-2012 - Manual (Page 69)

Last Calibration Window • 65
If any instrument has been downloaded to the GX-2012 Data Logger
Management Program using the Complete Download or Instrument
Information download buttons that has the BUMP DSP parameter set to
On, the Last Calibration Window will appear as below. The screen below is
shown with the Need Calibration and Need Bump Test options selected.
Only instruments that had the BUMP DSP instrument parameter turned On
when downloaded will appear in the Bump Test portion of the window. It
should be noted that once an instrument that has the BUMP DSP
parameter set to On has been downloaded using the Complete Download
or Instrument Information download buttons, the Bump Test portion of this
screen will always appear.
Figure 64: Last Calibration Window: BUMP DSP Off