RKI Instruments GX-2012 - Manual (Page 70)

66 • Last Calibration Window
The following screens are shown with the Bump Test portion of the window
active. If the BUMP DSP on all of the instruments you have downloaded is
set to Off, you will not see the Bump Test portion of these screens. For
more information on setting the BUMP DSP parameter, see the GX-2012
Operator’s Manual or Gas Tracer Operator’s Manual.
Viewing and Printing Last Calibration Data
Open the Last Calibration Window by clicking Last Calibration along the
right side of the program window. When you open the Last Calibration
Window the first time after launching the program, it will open with the
Need Calibration/Need Bump Test view options selected. There are three
view options in the Last Calibration window: Need Calibration/Need Bump
Test, Calibration Date/Bump Test Date, and Calibration Record/Bump Test
Record.
Need Calibration/Need Bump Test View Option
Selecting this option shows the last calibration date, last bump test date,
and the last download date for the instruments that are due for calibration
or bump testing. The calibration data appears at the top half of the screen
Figure 65: Last Calibration Window: Bump Test Function On