SPYPOINT TINY-W3 - Manual (Page 16)

16
Memory card/ SIM card/ "BUSY" LED • Controller
(BLACKBOX-D/BLACKBOX-4G)
MEMORY CARD
A memory card is required to operate the controller. The controller is
compatible with SD/SDHC memory cards, up to 32 GB capacity (sold
separately, p.44).
(BLACKBOX-D) When the controller’s memory card is full, the transmission
and recording of photos continue by clearing the first recorded photos on
the memory card.
When the START BLACKBOX option is selected and no memory card is used,
the screen indicates to insert a memory card. The BLACKBOX-D controller
also beeps. When the SD card is full, the screen displays "Memory card full".
Here is a table of the approximate number of photos that can be recorded
with different memory card capacities.
4 GB 8 GB 16 GB 32 GB
Photo
3 MP
20500 41000 82000 164000
5 MP 17000 34000 68000 136500
10 MP 9500 19000 38000 76000
INSERTING THE MEMORY CARD
Insert a SD/SDHC memory card (up to 32 GB capacity) in the card slot. The
card is inserted correctly when a click is heard.
Before inserting or removing a memory card, always turn off the
controller to prevent loss or damage of the photos already recorded.
REMOVING THE MEMORY CARD
Lightly press the memory card into the controller once to pop it out of the
slot and remove it.
INSERTING THE SIM CARD (BLACKBOX-4G)
Carefully insert a SIM card in the card slot, gold
contact area facing up.
Before inserting or removing a SIM card,
always turn off the controller.
REMOVING THE SIM CARD (BLACKBOX-4G)
Use pliers to gently remove the SIM card from the controller.
«BUSY» DEL (BLACKBOX-D)
The «BUSY» light, located above the screen, lights up when the controller
records a file.
«BUSY» DEL (BLACKBOX-4G)
The «BUSY» light, located above the screen, lights up when the controller
records a file, transfer photos or searches for the cellular signal. BLACKBOX-D BLACKBOX-4G