P.20), Settings • camera – SPYPOINT TINY-W3 User Manual

Page 20

Advertising
background image

20

Settings • Camera

Time lapse:

(Off/30s/1m/3m/5m/15m/30m/1h)

Allows the camera to take photos at regular preset intervals. For example,

if the option "5m" is selected in the TIME LAPSE mode, the camera takes

a photo every 5 minutes during the period of operation (start time and

stop time) even if there is no detection. This option allows the user to

obtain photos of game outside the detection range of the camera.

Note: The TIME LAPSE mode only applies in PHOTO mode, not in VIDEO

mode. When TIME LAPSE mode is selected, the DELAY option and the

MULTI-SHOT mode are disabled.

Remote control (RC-1):

(TINY

4G

)

(On/Off)

Allows the user to use the RC-1 remote control which works with the

REMOS wireless technology (sold separately, p.41). The remote control

allows to activate/deactivate the detection of the camera, to remotely

take a photo/video in an area of 500 ft and to activate the buzzer signal

on the BLACKBOX-4G controller in an area of 500ft.

Wireless sensor (MS-1):

(TINY

4G

)

(Off/1/2/3/4/5/6/7)

Allows the camera to be triggered wirelessly by one or more MS-1 devices

through the REMOS wireless technology, sold separately (p.42).

IR-Booster:

(TINY

4G

)

(On/Off)

Allows the camera to trigger, up to a distance of 50ft, one or more IR-

BOOSTER infrared lighting devices without the use of an additional trans-

mitter through the REMOS wireless technology. Sold separately, p.42.

Infrared:

(On/One LED/Off)

Allows the user to choose the desired infrared lighting.

On: All LEDs work when taking photos or videos at night.

One LED: Only a single LED works

(see figure). This option can be use-

ful when using an IR-Booster/Invisible

LEDs IR-Booster (sold separately,

p.42).

Off: LEDs are deactivated so your night photos or videos are black.

Side sensors:

(On/Off)

When the side sensors are activated, a total of 7 zones are covered. The

central sensor covers 5 zones. The side detectors are mainly used to pre-

pare the camera so when your target passes through the central sensor,

the system is already pre-triggered, increasing greatly the reaction time

of your camera (ideal when the camera is placed near a narrow trail).

The side sensors require more battery power.

34’

30’

65’

30°

70°

40°

S
C
S

Camera

Detection distance (central)

Detection distance

of the side sensors

s: Side sensors

c: Central sensor

: Detection zone

: Viewing field

30°: Detection angle of the central sensor

40°: Viewing angle for TINY series cameras

70°: Detection angle including both

central and side sensors (2)

LED for

infrared

sensor

Advertising
This manual is related to the following products: