SPYPOINT TINY-W3 - Manual (Page 19)

19
Settings • Camera
Sensitivity:
(Low/Medium/High)
Allows the user to choose the detection sensitivity of the camera. A higher
sensitivity allows the user to take more photos.
The camera will only detect sources of heat in movement. Make sure to
have the least possible objects in front of the camera during the positio-
ning. This prevents the camera to take photos when oriented towards the
sun while an object moves in front of the camera (e.g. a branch).
Date:
Allows the user to set the date as Month/Day/Year.
Time format:
(12h/24h)
Allows the user to select the time display over a period of 12 or 24 hours
on the photos. (e.g. 6:00 pm or 18:00)
Time:
Allows the user to set the time as Hour/Minute.
Stamp:
(Yes/No)
Allows the user to have date, time, temperature and moon phases printed
on the photos.
New moon:
Waxing Crescent:
First Quarter:
Waxing Gibbous:
Full moon:
Waning Gibbous:
Last Quarter:
Waning crescent:
Quality:
(Low/Medium/High)
Allows the user to set the photo resolution. The low resolution allows the
user to save space on the card and the high resolution allows the user to
get a better photo quality.
When the quality is set to "High", the video resolution is automatically
set to 1280 x 720 or 640 x 480 (TINY-W BF ) and when is set to "Medium"
or "Low", the video resolution is automatically set to 640 x 480 or 320 x
240 (TINY-W BF ).
Temperature:
(°C/°F)
Allows the user to select the temperature display.
Continuous:
(Yes/No)
Allows the user to take photos or videos even if the memory card is full.
The camera will continue to record photos or videos by deleting the first
recorded files.
Power (TINY-4G) :
(Batteries/Electricity)
Allows the user to select the type of power supply.
Choose "Electricity" if the camera is powered by a main electric power
supply (using a 12-volt DC adapter, #AD-12V, sold separately (p.41).
A main electric power supply is recommended when camera is used for
security purposes. It provides an instant trigger time when a movement is
detected. The lithium battery pack and the AA batteries can remain safely
inside the camera and it is ideal for blackouts. A 12-volt DC adapter that
can provide a minimum of 800 mA is required (p.41).
Note: When using a main electric power supply, the MULTI-SHOT mode
and the DELAY option are disabled as the camera triggers instantly every
time it detects motion. Also, the printing of the temperature on each
photo is disabled.